ENROLL NOW. Nighttime classes are available for the following Modules:

Thermal System Troubleshooting
AC/DC Electrical Systems


Basic Electrical (required modules):

  • AC/DC Electrical Systems (80 hours)
  • Electric Motor Control (80 hours)
  • Rotating Electric Machines (80 hours)
  • AC/DC Motor Troubleshooting (16 hours)
  • Electronic Sensors (16 hours)

Optional: Occupational Safety & Health Administration (OSHA 30 hours Online)

 

Basic HVAC/R Program (required modules):

  • AC/DC Electrical Systems (80 hours)
  • Environmental Applications (40 hours)
  • Thermal System Troubleshooting (Refrigeration) (100 hours)
  • Gas Systems (40 hours)

Optional: Occupational Safety & Health Administration (OSHA 30 hours Online)

Commercial Food Equipment Service Technician (CFEST) Program (required modules):

  • AC/DC Electrical Systems (80 hours)
  • Gas Systems (40 hours)
  • Steam Systems (20 hours)
  • Thermal System Troubleshooting (Refrigeration) (100 hours)

Optional: Occupational Safety & Health Administration (OSHA 30 hours Online)

Electrician Apprentice Program (required modules):

  • Mathematics 1 (8 hours)
  • Trigonometry 1 (8 hours)
  • Communication Skills (8 hours)
  • Conflict Resolution (4 hours)
  • Working in Groups (4 hours)
  • OSHA 30 (30 hours)
  • Measurement Tools (24 hours)
  • Mechanical Fabrication (32 hours)
  • AC/DC Electrical Systems (80 hours)
  • Electric Motor Control (80 hours)
  • Rotating Electric Machines (80 hours)
  • AC/DC Motor Troubleshooting (16 hours)
  • Electronic Sensors (16 hours)
  • AC Motor Drives (30 hours)
  • AC Motor Drive Troubleshooting (10 hours)
  • Electrical Fabrication (40 hours)
  • Electrical Power Distribution (60 hours)
  • Electrical Wiring Systems (20 hours)


General Maintenance Technician Program (required modules):

  • Mathematics 1 (8 hours)
  • Trigonometry 1 (8 hours)
  • Communication Skills (8 hours)
  • Conflict Resolution (4 hours)
  • Working in Groups (4 hours)
  • OSHA 30 (30 hours)
  • Measurement Tools (24 hours)
  • Mechanical Fabrication (32 hours)
  • AC/DC Electrical Systems (80 hours)
  • Rotating Electric Machines (80 hours)
  • AC/DC Motor Troubleshooting (16 hours)
  • Electronic Sensors (16 hours)
  • AC Motor Drives (30 hours)
  • AC Motor Drive Troubleshooting (10 hours)
  • Electrical Fabrication (40 hours)
  • Electrical Power Distribution (60 hours)
  • Electrical Wiring Systems (20 hours)
  • Thermal Systems 1 (30 hours)
  • Environmental Applications (40 hours)
  • Thermal System Troubleshooting (Refrigeration) (100 hours)
  • Gas Systems (40 hours)
  • Basic Hydraulics (50 hours)
  • Hydraulic Maintenance (40 hours)
  • Basic Pneumatics (60 hours)


HVAC/R Apprentice Program (required modules):

  • Mathematics 1 (8 hours)
  • Communication Skills (8 hours)
  • Conflict Resolution (4 hours)
  • Working in Groups (4 hours)
  • OSHA 30 (30 hours)
  • Measurement Tools (24 hours)
  • Mechanical Fabrication (32 hours)
  • AC/DC Electrical Systems (80 hours)
  • Electric Motor Control (80 hours)
  • Rotating Electric Machines (80 hours)
  • AC/DC Motor Troubleshooting (16 hours)
  • Electronic Sensors (16 hours)
  • AC Motor Drives (30 hours)
  • AC Motor Drive Troubleshooting (10 hours)
  • Thermal Systems 1 (30 hours)
  • Environmental Applications (40 hours)
  • Thermal System Troubleshooting (Refrigeration) (100 hours)
  • Gas Systems (40 hours)

Hydraulics Program (required modules):

  • Basic Hydraulics (50 hours)
  • Intermediate Hydraulics (50 hours)
  • Basic Hydraulic Troubleshooting (40 hours)
  • Hydraulic Maintenance (40 hours)

Optional: Occupational Safety & Health Administration (OSHA 30 hours Online)

Industrial Maintenance Technician Program (required modules):

  • Mathematics 1 (8 hours)
  • Trigonometry 1 (8 hours)
  • Communication Skills (8 hours)
  • Conflict Resolution (4 hours)
  • Working in Groups (4 hours)
  • OSHA 30 (30 hours)
  • Measurement Tools (24 hours)
  • Mechanical Fabrication (32 hours)
  • AC/DC Electrical Systems (80 hours)
  • Electric Motor Control (80 hours)
  • Rotating Electric Machines (80 hours)
  • AC/DC Motor Troubleshooting (16 hours)
  • Electronic Sensors (16 hours)
  • Programmable Controllers - AB CompactLogix (140 hours)
  • Programmable Logic Controller Troubleshooting (40 hours)
  • AC Motor Drives (30 hours)
  • AC Motor Drive Troubleshooting (10 hours)
  • Electrical Fabrication (40 hours)
  • Electrical Power Distribution (60 hours)
  • Electrical Wiring Systems (20 hours)
  • Thermal Systems 1 (30 hours)
  • Environmental Applications (40 hours)
  • Thermal System Troubleshooting (Refrigeration) (100 hours)
  • Gas Systems (40 hours)
  • Steam Systems (20 hours)
  • Basic Hydraulics (50 hours)
  • Intermediate Hydraulics (50 hours)
  • Electro-Fluid Power (80 hours)
  • Basic Hydraulic Troubleshooting (40 hours)
  • Hydraulic Maintenance (40 hours)
  • Basic Pneumatics (60 hours)
  • Intermediate Pneumatics (30 hours)
  • Basic Pneumatic Troubleshooting (50 hours)


National Institute of Metal Working Skills (NIMS) Duty Area 3 Program (required modules):

  • Basic Hydraulics (50 hours)
  • Intermediate Hydraulics (50 hours)
  • Basic Hydraulic Troubleshooting (40 hours)
  • Hydraulic Maintenance (40 hours)

Optional: Occupational Safety & Health Administration (OSHA 30 hours Online)


National Institute of Metal Working Skills (NIMS) Duty Area 4 Program (required modules):

  • Mechanical Fabrication (32 hours)
  • Basic Pneumatics (60 hours)
  • Intermediate Pneumatics (30 hours)
  • Basic Pneumatic Troubleshooting (50 hours)

Optional: Occupational Safety & Health Administration (OSHA 30 hours Online)


Pneumatics Program (required modules):

  • Basic Pneumatics (60 hours)
  • Intermediate Pneumatics (30 hours)
  • Basic Pneumatic Troubleshooting (50 hours)

Optional: Occupational Safety & Health Administration (OSHA 30 hours Online)


Refrigeration Apprentice Program (required modules):

  • Mathematics 1 (8 hours)
  • Communication Skills (8 hours)
  • Conflict Resolution (4 hours)
  • Working in Groups (4 hours)
  • OSHA 30 (30 hours)
  • Measurement Tools (24 hours)
  • Mechanical Fabrication (32 hours)
  • AC/DC Electrical Systems (80 hours)
  • Electric Motor Control (80 hours)
  • Rotating Electric Machines (80 hours)
  • AC/DC Motor Troubleshooting (16 hours)
  • Electronic Sensors (16 hours)
  • AC Motor Drives (30 hours)
  • AC Motor Drive Troubleshooting (10 hours)
  • Thermal Systems 1 (30 hours)
  • Environmental Applications (40 hours)
  • Thermal System Troubleshooting (Refrigeration) (100 hours)